Version 5.8 145 October 2009
SIP User's Manual 3. Web-Based Management
3.4.5.3.1 Configuring SIP General Parameters
The 'SIP General Parameters' page is used to configure general SIP parameters. For a
description of the parameters appearing on this page, refer to ''Configuration Parameters
Reference'' on page 291.
¾ To configure the general SIP protocol parameters:
1. Open the 'SIP General Parameters' page (Configuration tab > Protocol
Configuration menu > Protocol Definition submenu > SIP General Parameters
page item).
Figure 3-138: SIP General Parameters Page
To Next Page
Loading...
