SIP User's Manual 62 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
General Parameters
VLAN Mode
[VlANMode]
For a description of this parameter, refer to “Networking
Parameters” on page 291.
Native VLAN ID
[VLANNativeVlanID]
For a description of this parameter, refer to “Networking
Parameters” on page 291.
3.4.1.2 Configuring the Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Network Time Protocol (NTP), daylight saving time, and Telnet. For a description of
these parameters, refer to ''Configuration Parameters Reference'' on page 291.
¾ To configure the Application settings:
1. Open the 'Application Settings' page (Configuration tab > Network Settings menu >
Application Settings page item).
Figure 3-35: Applications Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 237.
To Next Page
Loading...
Need help?
General
