Version 5.8 299 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
SRV2IP_TransportType, SRV2IP_Dns1, SRV2IP_Priority1,
SRV2IP_Weight1, SRV2IP_Port1, SRV2IP_Dns2, SRV2IP_Priority2,
SRV2IP_Weight2, SRV2IP_Port2, SRV2IP_Dns3, SRV2IP_Priority3,
SRV2IP_Weight3, SRV2IP_Port3;
[\SRV2IP]
For example:
SRV2IP 0 =
SrvDomain,0,Dnsname1,1,1,500,Dnsname2,2,2,501,$$,0,0,0;
Notes:
 This parameter can include up to 10 indices.
 If the Internal SRV table is used, the device first attempts to resolve a
domain name using this table. If the domain name isn't located, the
device performs an SRV resolution using an external DNS server.
 To configure the Internal SRV table using the Web interface and for a
description of the parameters in this ini file table parameter, refer to
''Configuring the Internal SRV Table'' on page 209.
 For an explanation on using ini file table parameters, refer to ''Format
of ini File Table Parameters'' on page 273.
6.1.7 NTP and Daylight Saving Time Parameters
The Network Time Protocol (NTP) and daylight saving time parameters are described in the
table below.
Table 6-7: NTP and Daylight Saving Time Parameters
Parameter Description
NTP Parameters
Note: For detailed information on Network Time Protocol (NTP), refer to ''Simple Network Time
Protocol Support'' on page 545.
Web: NTP Server IP Address
EMS: Server IP Address
[NTPServerIP]
The IP address (in dotted-decimal notation) of the NTP server.
The default IP address is 0.0.0.0 (i.e., internal NTP client is
disabled).
Web: NTP UTC Offset
EMS: UTC Offset
[NTPServerUTCOffset]
Defines the Universal Time Coordinate (UTC) offset (in seconds)
from the NTP server.
The default offset is 0. The offset range is -43200 to 43200.
Web: NTP Update Interval
EMS: Update Interval
[NTPUpdateInterval]
Defines the time interval (in seconds) that the NTP client requests
for a time update.
The default interval is 86400 (i.e., 24 hours). The range is 0 to
214783647.
Note: It is not recommend to set this parameter to beyond one
month (i.e., 2592000 seconds).
Daylight Saving Time Parameters
Web: Day Light Saving Time
EMS: Mode
[DayLightSavingTimeEnable]
Determines whether to enable daylight saving time.
 [0] Disable (default)
 [1] Enable
To Next Page
Loading...
Need help?
General
