AudioCodes mediapack MP-500 User Manual

SIP User's Manual 386 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
 Each SIP Interface must have a unique signaling port (i.e.,
no two SIP Interfaces can share the same port - no port
overlapping).
 You can define up to three different SIP Interfaces per SRD,
where each SIP Interface pertains to a different application
type (i.e., GW, SAS, and SBC).
 For a detailed description of the table's individual
parameters and for configuring the table using the Web
interface, refer to ''Configuring the SIP Interface Table'' on
page 182.
 For a description on configuring ini file table parameters,
refer to ''Format of ini File Table Parameters'' on page 273.
Web: Classification Table
[Classification]
This ini file table parameter configures the Classification table.
This table classifies the incoming SIP INVITE to a Source IP
Group. The format of this parameter is as follows:
[Classification]
FORMAT Classification_Index = Classification_SrcIPGroupID,
Classification_SrcSRDID, Classification_SrcAddress,
Classification_SrcUsernamePrefix, Classification_SrcHost,
Classification_DestUsernamePrefix, Classification_DestHost;
[\Classification]
For example:
Classification 1 = -1, -1, , *, *, *, *;
Notes:
 This table can include up to 20 indices (where 0 is the first
index).
 If this classification process fails to determine the Source IP
Group to which the incoming packet belongs, the call can
either be rejected or assigned to the default IP Group of the
default SRD (and processed), according to the parameter
AllowUnclassifiedCalls.
 For a detailed description of the table's individual
parameters and for configuring the table using the Web
interface, refer to ''Configuring the Classification Table'' on
page 184.
 For a description on configuring ini file table parameters,
refer to ''Format of ini File Table Parameters'' on page 273
Web: SBC IP-to-IP Routing Table
[IP2IPRouting]
This ini file table parameter configures the SBC IP-to-IP
Routing table for routing received SIP messages such as
INVITE messages to a destination IP address. The format of
this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,

AudioCodes mediapack MP-500 Specifications

General

Brand	AudioCodes
Model	mediapack MP-500
Category	Gateway
Language	English