Chapter 5 Smart Battery 95
Self-heating State
Heat Preservation State
Table 5-3 Battery Level Indicator Status
LED1, LED3 and LED2, LED4 blink alternately in groups, indicating that it is heating.
2
The 4 LEDs blink at the same time, indicating that it has entered the heat preservation
state.
: Green light blinking : Off
When the temperature of the smart battery is lower than -10℃ or higher than 75℃, the
aircraft will not be allowed to take off. It is recommended to wait until the self-heating is
over or the battery naturally cools down to an appropriate temperature before operating.
When the temperature of the smart battery is lower than 10℃
, the internal resistance of
the battery will increase and the voltage will drop suddenly due to the low temperature,
which will reduce the usable capacity of the battery and reduce the operating time of the
aircraft. In low-temperature environments, make
sure that the battery is fully charged
before taking off.
If the battery level of the smart battery is lower than 50%, it is not recommended to take
off. When the battery level is low, it is difficult to activate the battery, which will reduce flight
safety.
During the flight, when the Autel Enterprise App prompts a low battery alarm, it is
recommended to immediately return to the home point or land.
In some low-temperature environments, even if the self-heating function is activated, the
battery temperature may still not reach the usable temperature. In such cases, please add
insulation measures during the heating process.
To Next Page
Loading...
