Chapter 6 Autel Enterprise App 101
Table 6-1 Details of the Main Interface of the Autel Enterprise App
1
Status Notification
Bar
Displays the flight mode, warning information, flight status,
battery level of the remote controller and aircraft, remote
controller signal, operating status of the obstacle avoidance
system, and other information.
Offers quick access to certain frequently used functions.
3
Offers access to a full-screen map interface. You can freely scroll
on the interface to view the map.
4
Interface
Provides access to the full-screen interface of the zoom camera.
5
Interface
Offers access to the full-screen interface of the thermal camera.
6
Offers access to the functions related to camera control, settings
viewing, and gimbal camera switching.
7 Attitude Ball
Displays real-time flight-related data of the aircraft to assist in
flight.
The Autel Enterprise App can automatically identify the gimbal camera model mounted on
the aircraft and adjust the display content of the main interface accordingly. When an
aircraft with a different gimbal camera model is connected to the remote controller, the
display content on the main interface of the Autel Enterprise App may vary.
Table 6-2 Multi-Screen Switching Operations on the Main Interface
1
Dual-Screen Mode
Tap this icon to enter the dual-screen mode.
The left and right sides of the remote controller
screen can display any two of the four preview
interfaces, which are "Map", “Wide” "Zoom", and
"Infrared".
2
Three-Screen
Mode
Tap this icon to enter the three-screen mode. The
Autel Enterprise App defaults to the three-screen
mode.
The left side of the remote controller screen displays
the "Map" preview interface, the upper-right side
displays the "Zoom" preview interface, and the
To Next Page
Loading...
