COPYRIGHT
The content of this manual is the property of Beamex Oy Ab and/or its subsidi-
aries and affiliates (referred hereinafter as Beamex). This manual and its con-
tent are protected by international copyright laws and all copyrights are retained
by Beamex. All rights reserved. Reproduction, distribution, transfer or storage of
the content presented in this manual, in whole or in part, is illegal and prohibited
without the prior written consent of Beamex.
The Beamex MC6 is a product of Beamex and contains HCF SDC-625 technol-
ogy. The HCF SDC-625 technology is owned by HART Communication Foun-
dation (HCF), 9390 Research Blvd., Suite I-350 Austin, Texas 78759, USA, and
may not be adopted, copied, reproduced, modified, licensed, sublicensed, sold
or resold other than under license from HCF.
The Beamex MC6 contains licensed software which requires that its source
code is available for you. Please contact Beamex to obtain it.
The Beamex MC6 is based in part on the FLTK project (http://www.fltk.org).
TRADEMARKS
“Beamex”, “Beamex – World-Class Calibration Solu-
tions as well as the color combination of green and
black as applied to the major part of the visible sur-
faces of a measurement device, are registered trade-
marks of Beamex Oy Ab. No content provided in this
manual should be interpreted as a permission or li-
cense to use Beamex trademarks. The use of
Beamex trademarks without the approval and consent
of Beamex is prohibited and violates trademark laws.
FOUNDATION Fieldbus is a trademark of Fieldbus
Foundation. PROFIBUS is a trademark of PROFIBUS
International. HART is a registered trademark of the
HART Communication Foundation. Windows is a reg-
istered trademark of Microsoft Corporation in the
United States and other countries.
All other trademarks or trade names mentioned in this
manual are the property of their respective holders.
To Next Page
Loading...
