To Next PageTo Next PageWhat to do if pressure is not rising in my MC6 family calibrator from BEAMEX Test Equipment?
If you don’t see the pressure rising in your MC6 family calibrator even though the pump is running, check your connections. Ensure that you are connected to the correct pressure module, specifically the one selected as the Reference Module in Controller Presets.
Why does pressure generation stop, pressure vent, and the ePG switch off during BEAMEX Test Equipment calibration?
If the pressure generation stops during calibration, the pressure is vented, and the ePG switches off, it is likely that the ePG battery has run out. To resolve this, recharge the ePG battery to continue your work.
What to do if pressure generation stops during BEAMEX Test Equipment calibration but pressure is not vented?
If pressure generation stops during calibration, but the pressure isn't vented, ensure all cables are securely connected. The ePG will halt generation if the USB communication cable is removed.
General| Model | MC6 |
|---|---|
| Type | Multifunction Calibrator |
| Accuracy | Varies depending on the measurement function and range. Refer to the detailed specifications in the MC6 manual. |
| Resolution | Varies depending on the measurement function and range. Refer to the detailed specifications in the MC6 manual. |
| Output Signal | Frequency |
| Power Supply | Rechargeable battery or external power supply |
| Process Connection | Varies depending on external pressure module used. |
Overview of the MC6 device and its operational modes.
Overview of the MC6's physical components and connectors.
Lists available software and hardware modules for the MC6.
Details pressure measurement capabilities and connections.
Explains generations and simulations, and using the soft keypad.
Details pulse counting settings and terminal usage.
Overview of the Meter function and how to use it for measurements.
Overview of the Calibrator function and its available tools.
Lists available tools like Scaling, Alarm, and Leak/Stability Test.
Overview of the instrument calibration process using the device.
Explains how to calibrate multiple instruments simultaneously.
Covers viewing and deleting calibration results.
Overview of the Data Logger option and its capabilities.
Details how to configure channels and save/open configurations.
Overview of digital communication with instruments.
Explains how to select instruments and manage device descriptions.
Covers calibrating and data logging HART instruments.
Overview of MC6 configuration and recalibration options.
Explains the Security Plus feature for restricting user changes.
Overview of custom units, sensors, and external device connections.
Explains how to add and use user-defined pressure units.
Covers safety approvals, symbols, and general safety precautions.
Details firmware updates, resetting the device, and sending for service.
Includes disclaimer regarding manual accuracy and Beamex's rights.
