General - Unpacking and Inspection 3
TYPOGRAPHICAL CONVENTIONS
The following typographical conventions apply to MC6 User Manual:
Bold text is used in following situations:
References to User Manual topics and parts,
MC6 keywords, i.e. terms shown in the User Interface and
other keywords, e.g. the names of fieldbus parameters.
Notes are shown in Narrow text with a border above and to the
left of the note text. Notes typically inform you of something
useful concerning the current topic.
Warnings are shown in Narrow and Bold. They also have a
shaded background and are surrounded by a border line.
Whenever you see a warning, read it carefully and take it
seriously. By not observing warnings, you may - at worst -
damage the calibrator and/or even risk your life.
At the factory each new MC6 passes a careful inspection. It should be free of
scrapes and scratches and in proper operation order upon receipt. The receiver
should, however, inspect the unit for any damage that may have occurred dur-
ing transit. If there are signs of obvious mechanical damage, package contents
are incomplete, or MC6 does not operate according to specifications, contact
the purchasing sales office as soon as possible.
If you have to return the instrument to the factory for any reason, use the origi-
nal packing whenever possible. Include a detailed description of the reason for
the return. Read also chapter Sending MC6 for Service in Appendix.
For a description of available options, see Options on page 13.
Standard accessories:
Accredited calibration certificate,
this User Manual,
Warranty Card,
a CD-ROM with product information, USB
Driver, other MC6 related software tools etc.,
pre-installed internal rechargeable Lithium
Polymer (LiPo) batteries,
test leads,
clips as follows:
a pair of Grabber clips and
two pairs of Alligator clips,
battery charger/eliminator and
If certain internal pressure modules have been
purchased, a pressure T-hose.
To Next Page
Loading...
