12 MC6 User Manual – Part 1, Introduction
PC COMMUNICATION / CALIBRATION SOFTWARE
Beamex CMX Calibration Software supports MC6 from version V2, revision
2.7 and onwards. Light, Professional and Enterprise editions.
USB COMMUNICATION DRIVER
A USB communication driver for communication between MC6 and a personal
computer (PC) is available in the CD-ROM shipped with MC6. If you do not
have the CD-ROM at hand, the driver is also available at Beamex's web site:
http://www.beamex.com. Look for MC6 or Downloads.
Supported operating systems: Windows
®
XP, Windows
®
Vista Professional and
Windows
®
7 Professional and Windows
®
8.1.
Note.
There are USB drivers for both 32 bit operating systems and
for 64 bit operating systems. When installing the driver, the op-
erating system automatically selects the driver that suits its
needs.
MC6 RELATED TOOLS AVAILABLE FOR PC
The following tools are shipped on a DVD-ROM together with MC6:
Beamex MC6 Data Log Viewer, for transferring Data Log results to a
PC and viewing them on the PC.
Beamex MC6 Device Description Installer, for installing new Device
Descriptions of smart transmitters from a PC to MC6.
Beamex MC6 Fieldbus Configuration Viewer, for downloading smart
transmitter configurations read into MC6 to a PC.
Beamex MC6 Remote Controller, for controlling MC6 via a PC.
These tools are also available for download on Beamex's web site.
To Next Page
Loading...
