Print High Voltage Reports
1. Select <Reports> from the home screen. Select <Administrative> then select <QA>,
then select <High Voltage>, which will open up the From date range screens.
2. Select either the <from> or <to> to set the starting/ending dates for the reports.
Use the arrows to adjust the date.
3. When you have selected your date range, select <accept> to display the High Voltage
Report information.
4. Select the <printer> icon to print your report.
5. Select <back> to return to the QA Report screen. (See report below.)
NOTE: You can also view and print the High Voltage Report from the High Voltage History
Button in the Quality Assurance Function Screen. It works the same way as the Report
Screen.
Figure 11.7. High Voltage Report.
Printed on: 4/19/2013 2:38:46 PM
High Voltage Report
Detector Detector S/N Date Performed Voltage Staff
Probe (Probe) 121 4/15/2013 11:05:58 AM 1,021 anna marie
Well (Well) 122 3/14/2013 2:10:07 PM 1,058 yank yank
Probe (Probe) 121 3/14/2013 2:04:23 PM 1,070 anna marie
Well - 122 (Well) 122 3/8/2013 3:08:22 PM 1,104 Tom Test
Probe - 121 (Probe) 121 3/8/2013 3:04:28 PM 1,070
Johnson Memorial Clinic
20 Hospital Way
Port Jefferson,NY 11967
Page 1 of 1Software Ver: 1.0.66.0
Comments :
Signature : Date Signed :
To Next Page
Loading...
