Blackmagic URSA Cine - Blackmagic URSA Cine 12 K LF + EVF

Blackmagic URSA Cine 12K LF + EVF
This kit contains everything listed in the URSA Cine 12K LF kit plus a case for the Blackmagic
Media Module and all items in the Blackmagic URSA Cine EVF kit in a slightly larger custom
foamed Pelican case. The added room also enables the URSA Cine Baseplate 19 to be packed
in the case already attached to your camera which will save you valuable time on set.
The small round cavity in the foam inlay is included for packing an optional short handled screw
driver if needed.
URSA Cine 12K LF + EVF
This kit includes all of the items contained in the URSA Cine 12K LF kit in a larger custom
foamed Pelican hard case plus the following additional items:
 Blackmagic URSA Cine EVF.
 Blackmagic URSA Cine EVF Rotating
Bracket with built in 19mm carbon
fibre rod.
 Blackmagic URSA Cine EVF Bracket
Rod Mount.
 Blackmagic URSA Cine EVF Extension.
 2x Short carbon fibre 15mm rods.
 Blackmagic Media Module Case
 Long USB viewfinder cable.
Right angle to straight.
 Short USB viewfinder cable.
Right angle to straight.
 Short USB viewfinder cable.
Right angle atboth ends.
 Rubber eyecup.
 Fabric eye chamois.
6What’s in the Kit?