Blackmagic URSA Cine - Attaching URSA Cine EVF Extension

The motion sensor is located at the bottom of the
URSA Cine EVF
Attaching URSA Cine EVF Extension
Blackmagic URSA Cine EVF Extension is an EVF accessory that is packed inside the URSA Cine
12K LF + EVF kit and the URSA Cine EVF accessory box when purchasing the EVF separately.
Theextension arm lets you extend the EVF eyepiece when you’re positioned further away from
the camera. For example, when operating the camera in a seated position on equipment like a
camera dolly or when using a geared head. A hinged bracket is attached to the bottom of the
arm so you can fix an eyepiece leveller.
Removing the URSA Cine EVF from URSA Cine EVF Rotating Bracket
1
2
REC
VF3
EXP
VF2
ZOOM
VF1
0
1
20
19
18
17
16
15
2
3
1
1
2
REC
VF3
EXP
VF2
ZOOM
VF1
0
1
20
19
18
17
16
15
2
3
2
With the eyepiece glass facing you, pull the EVF’s
locking lever towards you to release the URSA
Cine EVF from URSA Cine EVF Rotating Bracket’s
mini dovetail slot.
Gently lift the EVF from the slot.
58Blackmagic URSA Cine EVF