Blackmagic URSA Cine EVF
Blackmagic URSA Cine EVF is a powerful electronic viewfinder designed for your URSA Cine.
The color OLED display and precision glass optics provides abright, vivid, and lifelike image so
you can quickly find focus and see the finest detail in your images.
This EVF is perfect for handheld operation on the shoulder, or for environments where you
need absolute precision with zero reflection and light glare, for example in extremely bright
shooting conditions.
The viewfinder is connected and powered via USB. Your camera’s ‘monitor’ page ‘EVF’
settings let you customise the overlays on the EVF output or remove them entirely by selecting
‘clean feed’.
Blackmagic URSA Cine EVF’s modular design lets you easily reposition, or even remove and
attach to accessories, for example the URSA Cine EVF Extension Arm.
Assembling and Attaching the EVF
If you have purchased the URSA Cine 12K plus EVF kit, URSA Cine EVF is packed inside
your camera case in two parts. The EVF eyepiece is stored towards the front left of the case
and the factory assembled EVF arm with 15mm carbon fibre rods are stored behind it. When
purchasing URSA Cine EVF separately, the EVF arm requires some assembly prior to attaching
to the camera.
This section of the manual includes:
Assembling the URSA Cine EVF mounting mechanism.
Attaching the eyepiece to URSA Cine EVF Rotating Bracket.
Connecting URSA Cine EVF to your camera.
Positioning URSA Cine EVF.
Attaching URSA Cine EVF Extension.
Assembling the URSA Cine EVF Mounting Mechanism
The URSA Cine EVF arm consists of:
1 Blackmagic URSA Cine EVF Rotating Bracket
2 Blackmagic URSA Cine EVF Bracket Rod Mount
3 Two short 15mm carbon fibre rods.
NOTE If you have purchased the URSA Cine 12K LF + EVF kit, you can skip this section
and move to the ‘attaching the eyepiece to the EVF arm’ section.
The first step to assembling the URSA Cine EVF Rotating Bracket is to attach the two 15mm
rods to URSA Cine EVF Bracket Rod Mount.
52Blackmagic URSA Cine EVF
To Next Page
Loading...