5 Slate
Press to toggle the slate feature on or off. The slate lets you enter metadata for post
production use. For more information, refer to the ‘entering metadata’ section.
6 Audio
The audio page is not currently active, to adjust the audio gain levels simply use the knobs
to the left of the assist station, or tap the audio meters on the heads up display.
7 Stream
The streaming page is not currently active. Once you have set up your streaming platform
in the setup menu and connected your camera to a network, you can press and hold the
‘stream’ button to begin streaming locally or via the Internet. Press and hold again to stop
the stream.
8 Menu
Press the ‘menu’ button marked with the ellipsis icon to open the menu settings. Press
again to close the menu. You can also tap on the menu icon in the LCD touchscreen to turn
the menu settings on and off.
If you find you don’t need a physical menu button on the side of your camera, you can
remap the menu button to another feature using your camera’s setup menu. For example,
it can be set to trigger playback or toggle ND filters. For more information, refer to the
‘settings’ section.
9 Record
Press the ‘record’ button to start recording a clip, the button will illuminate red. Press again
to stop recording.
The ‘record’ button on this side of the camera can be remapped to a different function
in your camera’s ‘setup’ menu. If you are concerned about triggering record accidentally,
you can disable the record button by setting it to ‘none’. For more information, refer to the
‘settings’ section.
76Control Buttons
To Next Page
Loading...