115 S850 Operation & Maintenance Manual
OPERATOR CAB (CONT’D)
Cab Door Sensor
This machine may be equipped with a Cab Door Sensor.
Figure 164
The cab door has a sensor (Item 1) [Figure 164]
installed which deactivates the lift and tilt valves when the
d
oor is open.
Figure 165
The LIFT AND TILT VALVE light (Item 1) [Figure 165] will
be OFF when the door is closed, the key switch is turned
to
RUN or the RUN button is pressed, the seat bar is
lowered and the PRESS TO OPERATE LOADER button
is pressed.
Figure 166
The LIFT AND TILT VALVE light (Item 1) [Figure 165] will
be ON when the door is open, the key switch is turned to
R
UN or the RUN button is pressed, the seat bar is
lowered and the PRESS TO OPERATE LOADER button
is pressed.
[DOOR] will
appear in the data display [Figure 166].
Dealer Copy -- Not for Resale
To Next Page