178 S850 Operation & Maintenance Manual
PASSWORD SETUP (DELUXE INSTRUMENTATION PANEL)
Password Setup is available on mac
hines with a Deluxe
Instrumentation Panel.
Password Description
All new machines with a Delux
e Instrumentation Panel
arrive at Bobcat dealerships with the keypad in locked
mode. Locked mode means that a password must be
used to start the engine.
For security purposes, your dealer may change the
p
assword and set the keypad in the locked mode. Your
dealer will provide you with the password.
Master Password:
A p
ermanent, randomly selected password set at the
factory that cannot be changed. This password is
used for service by the Bobcat dealer if the owner
password is not known or to change the owner
password.
Owner Password:
Allows for full use of the loader and to set up the
Deluxe Instrumentation Panel. There is only one
owner password. The owner password must be used
to change the owner or user passwords. Owner
should change the password as soon as possible for
security of the loader.
User Password:
Allows starting and operating the loader; cannot
change password or any of the other setup features.
For the procedures to change passwords: (See Changing
The Owner Password on Page 178.) and (See Changing
The User Passwords on Page 179.)
Changing The Owner Password
Press a
scroll button (Item
1) repeatedly until the
Security screen icon
(Inset) is highlighted.
Select [1. PASSWORDS /
LOCKOUTS].
Enter owner password
and press [ENTER].
Select [1. USER
SETTINGS].
Select [1. OWNER].
Select [2. CHANGE
PASSWORD].
Enter new owner
password and press
[ENTER].
You will be prompted to
reenter the new owner
password.
Dealer Copy -- Not for Resale
To Next Page
Loading...