58 S850 Operation & Maintenance Manual
DRIVE RESPONSE
Description
Drive Response changes how responsive (more or less)
th
e loaders drive and steering systems are when the
operator moves the controls.
Drive Response can be changed by the operator for
d
ifferent drive response preferences and various job
conditions and attachment use.
NOTE: Changes to drive response do not affect
br
aking or stopping the loader.
There are three drive response settings:
• [D
R-1] provides a smooth responsive reaction to
control movement. (Drive only)
• [DR-2] is the default setting and provides a normal
responsive reaction to control movement. (Drive only)
• [DR-3] provides a quick responsive reaction to control
movement. (Drive only)
Operation
NOTE: Changes CANNOT be performed until the seat
bar is lowered, the engine is started and the
PRESS TO OPERATE LOADER button is
pressed to activate the BICS™.
Perform PRE-STARTING PROCEDURE and STARTING
THE ENG
INE procedures:
1. Fasten seat belt.
2.
Lower seat bar.
3. Place controls in NEUTRAL position.
4. Start the engine.
5. Press the PRESS TO OPERATE LOADER button.
6. Current drive response setting will be displayed briefly
in the data display.
NOTE: (SJC) Raising the seat bar or changing control
mode (ISO / H) will cause the machine to
disengage from drive response. The last
displayed setting will remain in effect until the
machine is turned OFF.
Dealer Copy -- Not for Resale
To Next Page
Loading...