Bobcat S850 - Lift Arm Bypass Control; Parking Brake Operation

44 S850 Operation & Maintenance Manual
SEAT BAR RESTRAINT SYSTEM
Operation
Figure 33
The Seat Bar Restraint System has a pivoting seat bar
wit
h armrests (Item 1) [Figure 33].
The operator controls the use of the seat bar. The seat
b
ar in the down position helps to keep the operator in the
seat.
WARNING
AVOID INJURY OR DEATH
When operating the machine:
• Keep the seat belt fastened snugly.
• The seat bar must be lowered.
• Keep your feet on the pedal controls or footrests
and hands on the controls.
W-2261-0909
When the seat bar is down, the engine is running, the
PRESS TO OPERATE LOADER button is activated, and
the brake is released, the lift, tilt, and traction drive
functions
can be operated.
When the seat bar is raised, the lift, tilt and traction drive
f
unctions are deactivated and both foot pedals (if
equipped) will be locked when returned to NEUTRAL
position.
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s seat:
• Lower the lift arms and put the attachment flat on
the ground.
• Stop the engine.
• Engage the parking brake.
• Raise the seat bar.
• Move all controls to the NEUTRAL / LOCKED
position to make sure the lift, tilt and traction
drive functions are deactivated.
The seat bar system must deactivate these functions
when the seat bar is up. See your Bobcat dealer for
service if controls do not deactivate.
W-2463-1110
P-90674A
1
46 of 210
Dealer Copy -- Not for Resale