77 S850 Operation & Maintenance Manual
PRE-STARTING PROCEDURE
Entering The Loader
Figure 96
Use the bucket or attachment steps, grab handles, and
saf
ety treads (on the loader lift arms and frame) to get on
and off the loader, maintaining a 3-point contact at all
times [Figure 96]. Do not jump.
Safety treads are installed on the Bobcat loader to
p
rovide a slip resistant surface for getting on and off the
loader.
Keep safety treads clean and replace when damaged.
Rep
lacement treads are available from your Bobcat
dealer.
Operation & Maintenance Manual And Operator’s
Hand
book Locations
Figure 97
Read and understand the Operation & Maintenance
Ma
nual and the Operator’s Handbook (Item 1)
[Figure 97] before operating the loader.
The Operation & Maintenance Manual and other
ma
nuals can be kept in a container (Item 2) [Figure 97]
provided behind the operator seat.
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
Dealer Copy -- Not for Resale
To Next Page
Loading...