42 S850 Operation & Maintenance Manual
OPERATOR CAB
Description
The Bobcat loader has an operator cab (ROPS and
FO
PS) as standard equipment to protect the operator
from rollover and falling objects. The seat belt must be
worn for rollover protection.
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat Company. Changes to
the cab can cause loss of operator protection from
rollover and falling objects, and result in injury or
death.
W-2069-0200
Side Windows
This machine may be equipped with Side Windows.
Figure 26
Pull the knob (Item 1) [Figure 26] and slide backward to
open window. Release knob at cutout to lock in desired
p
osition. Pull the knob and slide forward to close window.
Door Operation
This machine may be equipped with a Front Door.
Figure 27
Push the knob (Item 1) and pull the handle to open the
fr
ont door. A lock is provided in the knob (Inset)
[Figure 27] to lock the front door when the loader is not
in use.
Figure 28
Pull the front door closed using the handle (Item 2)
[Figure 28].
Pull the lever (Item 1) toward you to unlatch the front
do
or. Push on the handle (Item 2) [Figure 28] to open
the front door.
Dealer Copy -- Not for Resale
To Next Page
Loading...