27 S850 Operation & Maintenance Manual
INSTRUMENT PANEL IDENTIFICATION (CONT’D)
Left Panel (Earlier Models) (Cont’d)
* See SYSTEM SETUP AND ANALYSIS for Service Code description. (See DIAGNOSTIC SERVICE CODES on Page 167.)
REF.
NO.
DESCRIPTION FUNCTION / OPERATION
1 ENGINE TEMPERATURE GAUGE Shows the engine coolant temperature.
2 LEFT TURN SIGNAL (Option) Indicates left turn signals are ON.
3 GENERAL WARNING Malfunction with one or more machine functions. (See Service Codes*)
4 TWO-SPEED High range selected.
5 ENGINE MALFUNCTION Engine malfunction or failure. (See Service Codes*)
6 ENGINE COOLANT TEMPERATURE Engine coolant temperature high or sensor error.
7 DISPLAY SCREEN Displays information. (See Display Screen in this manual.)
8 SEAT BELT Instructs operator to fasten seat belt. Remains lit for 45 seconds.
9 SEAT BAR The light comes on when the seat bar is UP.
10 LIFT AND TILT VALVE The light comes on when the lift and tilt functions cannot be operated.
11 PARKING BRAKE The light comes on when the loader cannot be driven.
12 RIGHT TURN SIGNAL (Option) Indicates right turn signals are ON.
13 SHOULDER BELT Instructs operator to fasten shoulder belt when operating in high range.
Remains lit while in high range.
14 HYDRAULIC SYSTEM MALFUNCTION Hydraulic system malfunction or failure. (See Service Codes*)
15 FUEL Fuel level low or sensor error.
16 FUEL GAUGE Shows the amount of fuel in the tank.
17 LIGHTS Press once for FRONT work lights and REAR taillights. (Left green
LED will light.) Press a second time to add REAR work lights. (Left and
right green LEDs will light.) Press a third time to turn all lights off. (Left
and right green LEDs will be off.)
Press and hold five seconds to display software version in display
screen.
18 HIGH-FLOW (Option) Press once to engage the HIGH-FLOW auxiliary hydraulics. (Left green
LED will light.) Press a second time to disengage.
19 AUXILIARY HYDRAULICS Press once to activate the auxiliary hydraulic system. (Left green LED
will light.) Press a second time to deactivate the system.
20 INFORMATION Cycles through (after each button press):
• Hourmeter (On startup)
• Engine rpm
• Battery voltage
• Maintenance clock (Press and hold for seven seconds when
displayed to reset the maintenance clock.)
• Service codes*
21 TRACTION LOCK OVERRIDE Functions only when the seat bar is raised and the engine is running.
Press once to unlock the brakes. Allows you to use the steering
handles or joystick(s) to move the loader forward or backward when
using the backhoe attachment. (See TRACTION LOCK OVERRIDE in
this manual.) Press a second time to lock the brakes.
22 PRESS TO OPERATE LOADER Press to activate the BICS™ when the seat bar is down and operator is
seated in operating position. Button will light.
Press and hold three seconds to access Drive Response and
Steering Drift Compensation adjustment menus. (See DRIVE
RESPONSE and STEERING DRIFT COMPENSATION in this manual.)
23 PARKING BRAKE (Standard on all
loaders)
Press the top to engage the Parking Brake. Press the bottom to
disengage. (See PARKING BRAKE in this manual.)
Dealer Copy -- Not for Resale
To Next Page
Loading...