BT Micro Owner’s Manual
75
Enter your extension number when prompted.
Enter your Voicemail Password, (1111 by default), followed by
#.
Select ‘Change password’.
Enter your new Voicemail Password, which can be up to eight
digits long.
Press ’Confirm’.
Press the Hands-free Key to finish programming.
Note
If you forget your Voicemail Password, you can check all
extension Voicemail Passwords from the Programming
Extension.
To check all Voicemail Passwords
For configuration via the web interface, see page 106.
For configuration via the featurephone interface, see page 182.
To operate voicemail from a standard telephone
Standard telephones can also be allocated Voice Mailboxes.
When a Voice box is allocated the ‘Divert On No Answer’ is
automatically set for the extension. You can set ‘Divert All Calls’
or ‘Divert On Busy’ to the Mailbox as well by setting the Divert to
710.
732 for ‘Divert all calls’
733 for ‘Divert on busy’
734 for ‘Divert on no answer’
Your telephone will be rung if any messages have been left in
your own Mailbox or the Answering Machine. If your extension
is equipped with a phone that can detect CDS information an
indication will be given on the phone that you have new voice
messages. If your phone does not have CDS capability you
should manually access your Voice Mailbox for messages.
To access the Voice Mailbox, dial the code 711, followed by
your extension number, Voicemail Password and #. Then dial
the following numbers to access your messages:
While listening to the Greeting
Dial 1 Playback commences at the first message
Dial 91 Change the outgoing greeting
Dial 92 Check the outgoing greeting
Dial 93 Delete the outgoing greeting
Dial 0 Change Voicemail Password
When playback of messages has commenced
Dial # Playback is paused
Dial 2 Save this message and move to the next message
Dial 3 Erase this message and move to the next message
Dial 4 Go back to the start of the message
Dial 5 Go back to the previous message
Dial 6 Erase all messages
Dial 7 Go back ten seconds
Dial 8 Go forward ten seconds / Skip the time stamp
Dial 9 Forward the message to another extension
Dial 0 Return Call. Automatically make a call to the caller who
left the message.
Answering Machine
This feature allows you to set up the Answering Machine so that
it can be turned on and off as required. You can also set the
To Next Page
Loading...
Need help?
General