Canon imageCLASS D1120 - Page 117

Registering Destinations in the Address Book (D1180/D1170/D1150)
5-6
Storing/Editing One-Touch Keys
4
Press or to select a one-touch key
(01 to 20) for which you want to register
the address, then press [OK].
[ 0 1 ] N O T R E G I S T E R E D
1 - T O U C H S P D D I A L
You can also select a one-touch key by pressing
the corresponding one-touch key.
5
Press or to select <SMB>, then
press [OK].
S M B
1 - T O U C H S P D D I A L
6
Press or to select <HOST NAME>,
then press [OK].
1 . H O S T N A M E
1 - T O U C H S P D D I A L
7
Use – , [numeric keys] and
[Tone] to enter the name of the file
server on the network (120 characters
maximum), then press [OK].
s e r v e r 1
H O S T N A M E : 1
Ex.
8
Press or to select <NAME>, then
press [OK].
2 . N A M E
1 - T O U C H S P D D I A L
9
Use – , [numeric keys] and
[Tone] to enter the destination’s name
(16 characters maximum), then press
[OK].
S E R V E R 1
N A M E : 1
Ex.
10
Press or to select <FILE PATH>,
then press [OK].
3 . F I L E P A T H
1 - T O U C H S P D D I A L
11
Use – , [numeric keys] and
[Tone] to specify the folder to which
the job is to be sent (120 characters
maximum), then press [OK].
s e r v e r 1 / h o m e / s h a r e
F I L E P A T H : a
Ex.
12
Press or to select <LOGIN NAME>,
then press [OK].
4 . L O G I N N A M E
1 - T O U C H S P D D I A L
13
Use – , [numeric keys] and
[Tone] to enter the login name (24
characters maximum), then press [OK].
c a n o n
L O G I N N A M E : a
Ex.
14
Press or to select <PASSWORD>,
then press [OK].
5 . P A S S W O R D
1 - T O U C H S P D D I A L
15
Use – , [numeric keys] and
[Tone] to enter the password (14
characters maximum), then press [OK].
1 2 3 X X X X
P A S S W O R D : a
Ex.
To register another one-touch key, repeat the
procedure from step 4.