Canon imageCLASS D1120 - Log in Mode

Before Using the Machine
1-13
Display (Standby Mode)
Log In Mode
If the Department ID Management or User ID
Management is set, the Log In screen is displayed.
For information on the Department ID Management
or User ID Management, see “Security,” in the e-
Manual.
For Department ID Management
E N T E R D E P T . I D
Use – [numeric keys] to enter the
Department ID and password, then press [OK] or
[Log In/Out].
For User ID Management
E N T E R U S E R I D : a
Use – [numeric keys] to enter the User ID and
password, then press [OK] or
[Log In/Out].
Make sure to press [Log In/Out] after using the machine
when the Department ID/User ID Management is set.
When the main power switch is turned ON, the message
<INITIALIZING.../PLEASE WAIT> is shown until the standby
display appears.
●
●
–
–