Canon imageCLASS D1120 - Registering Your Machines Fax Number

Fax (D1180/D1170/D1150)
6-12
Introduction to Using Fax Functions
4
Press or to select <TX SETTINGS>,
then press [OK].
1 . T X S E T T I N G S
T X / R X C O M M O N S E T .
5
Press or to select <UNIT NAME>,
then press [OK].
1 . U N I T N A M E
T X S E T T I N G S
6
Use – , [numeric keys] and
[Tone] to enter the unit name (up to 24
characters), then press [OK]. (For
information on how to enter characters,
see “Information About the Keys,” in the e-
Manual.)
C A N O N
U N I T N A M E : a
Ex.
7
Press [Stop/Reset] to return to the
standby mode.
Registering Your Machine’s Fax
Number
Your machine’s fax number must be registered.
When you send a document, the number that you
registered is printed on the recipient’s paper.
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <USER
SETTINGS>, then press [OK].
2 . U S E R S E T T I N G S
F A X S E T T I N G S
5
Press or to select <UNIT
TELEPHONE #>, then press [OK].
1 . U N I T T E L E P H O N E #
U S E R S E T T I N G S
6
Use – , [numeric keys] to enter
your fax/telephone number (up to 20
digits, including spaces), then press [OK].
(For information on how to enter
characters, see “Information About the
Keys,” in the e-Manual.)
1 2 X X X X X X X
U N I T T E L E P H O N E #
Ex.
7
Press [Stop/Reset] to return to the
standby mode.