Before Using the Machine
1-17
Telephone Line Settings (D1180/D1170/D1150)
Telephone Line Settings
(D1180/D1170/D1150)
Set the type of telephone line that is connected to the machine. If this setting is incorrect,
you will be unable to communicate with other machines. Make sure to check the type of
telephone line that you are using, and make the correct setting. The default setting is
<TOUCH TONE>.
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <USER
SETTINGS>, then press [OK].
2 . U S E R S E T T I N G S
F A X S E T T I N G S
5
Press or to select <TEL LINE
TYPE>, then press [OK].
2 . T E L L I N E T Y P E
U S E R S E T T I N G S
6
Press or to select the telephone
line type, then press [OK].
T O U C H T O N E
T E L L I N E T Y P E
<TOUCH TONE>: Tone dialing
<ROTARY PULSE>: Pulse dialing
If you do not know the telephone line type,
call your telephone service provider for
details.
7
Press [Stop/Reset] to return to the
standby mode.
–
–
–
To Next Page
Loading...
