Canon imageCLASS D1120 - Optional Settings for Faxtel Mode

Fax (D1180/D1170/D1150)
6-51
Optional Settings for FaxTel Mode
Optional Settings for FaxTel Mode
If you select <FaxTel> for the receive mode, you can specify the length of the detection time,
ring time, and machine’s action after the ringing ends. The default settings are as follows:
<RING START TIME>: <6 SEC>
<F/T RING TIME>: <15 SEC>
<F/T SWITCH ACTION>: <RECEIVE>
–
–
–
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <RX SETTINGS>,
then press [OK].
4 . R X S E T T I N G S
F A X S E T T I N G S
5
Press or to select <FAX/TEL OPT.
SET>, then press [OK].
2 . F A X / T E L O P T . S E T
R X S E T T I N G S
6
Press or to select <RING START
TIME>, then press [OK].
1 . R I N G S T A R T T I M E
F A X / T E L O P T . S E T
7
Use , , or – [numeric keys] to
specify the duration (4 to 30 seconds) for
which the machine attempts to detect
the fax tone before it starts ringing, then
press [OK].
6 S E C
R I N G S T A R T T I M E
If the machine receives a fax, the machine does
not ring and switches to the receive mode
automatically.
8
Press or to select <F/T RING
TIME>, then press [OK].
2 . F / T R I N G T I M E
F A X / T E L O P T . S E T