Canon imageCLASS D1120 - To 1-Sided Copying

Copying
3-27
2-Sided Copying
2 to 1-Sided Copying
You can make 1-sided copies from 2-sided
documents.
1
Place documents in the ADF.
For details, see “Placing Documents,” on p. 2-4.
2
Press [COPY].
3
Press [2-Sided] repeatedly to select
<2 >1-SIDED>, then press [OK].
2 > 1 - S I D E D
4
Press or to select <BOOK TYPE>
or <CALENDAR TYPE>, then press [OK].
B O O K T Y P E
T Y P E O F O R I G I N A L
<BOOK TYPE>: The front and back sides of the
document will have the same top-bottom
orientation.
<CALENDAR TYPE>: The front and back sides
of the document will have the opposite top-
bottom orientation.
–
–
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
T E X T / P H O T O
1 0 0 % * L T R
0 1
6
Press [Start].
You can skip step 4. In this case, the machine
scans 2-sided documents in the <BOOK TYPE>
orientation to make 1-sided copies.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as [SEND/FAX]/
[FAX], all settings will be also canceled. If
you want to keep the settings, store the settings
as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”
on p. 13-5.)
–
–