Canon imageCLASS D1120 - Dialing an Overseas Number (with Pauses)

Fax (D1180/D1170/D1150)
6-15
Sending Fax Documents
2
Press [SEND/FAX] repeatedly to
select <FAX>, then press [OK].
S E L E C T : O K
F A X
For the D1150, skip this step.
3
Press [Hook].
Make sure to confirm the dial tone before
entering a fax number. If you enter the number
before the dial tone is heard, the call may not be
connected, or the wrong number may be dialed.
4
Use – [numeric keys] to dial the
required information service.
T E L = 0 1 2 X X X
F A X N U M B E R
Ex.
5
When the recorded message of the
information service answers, press
[Tone] to switch to tone dialing.
T E L = 0 1 2 X X X *
F A X N U M B E R
Ex.
6
Use – [numeric keys] to enter the
numbers requested by the information
service.
T E L = 0 1 2 X X X * 3 4 5 6 #
F A X N U M B E R
Ex.
7
If you want to receive faxes, press
[Start].
If you are using the external telephone, hang up
the handset after pressing
[Start].
Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you
may need to insert a pause within the number.
1
Place documents.
2
Press [SEND/FAX]/ [FAX].
3
Press [SEND/FAX] repeatedly to
select <FAX>, then press [OK].
S E L E C T : O K
F A X
For the D1150, skip this step.
4
Adjust any necessary scan settings for
your documents.
For details, see “Adjusting Density,” on p. 6-29,
“Selecting Image Quality,
” on p. 6-30, and “2-
Sided Documents,
” on p. 6-31.
5
Use – [numeric keys] to dial the
international access code.
T E L = 0 1 2
F A X N U M B E R
Ex.
For details on international access codes,
contact your local telephone company.