Fax (D1180/D1170/D1150)
6-11
Introduction to Using Fax Functions
4
Use
– [numeric keys] to enter the
date (month/day/year) and time (in 24-
hour/military time format), then press
[OK].
1 2 / 3 1 / ' 0 8 1 5 : 5 0
D A T E & T I M E S E T T I N G
Ex.
5
Press [Stop/Reset] to return to the
standby mode.
Setting the Type of Telephone Line
Set the type of telephone line that is connected to
the machine. If this setting is incorrect, you will be
unable to communicate with other machines. Make
sure to check the type of telephone line that you
are using, and make the correct setting. The default
setting is <TOUCH TONE>.
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <USER
SETTINGS>, then press [OK].
2 . U S E R S E T T I N G S
F A X S E T T I N G S
5
Press or to select <TEL LINE
TYPE>, then press [OK].
2 . T E L L I N E T Y P E
U S E R S E T T I N G S
6
Press or to select the telephone
line type, then press [OK].
T O U C H T O N E
T E L L I N E T Y P E
<TOUCH TONE>: Tone dialing
<ROTARY PULSE>: Pulse dialing
If you do not know the telephone line type,
call your telephone service provider for
details.
7
Press [Stop/Reset] to return to the
standby mode.
Registering the Machine’s Name
Your name or company’s name must be registered
as the machine’s name.
When you send a document, the name that you
registered is printed as the sender’s name on the
recipient’s paper.
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <TX/RX
COMMON SET.>, then press [OK].
2 . T X / R X C O M M O N S E T .
T X / R X S E T T I N G S
–
–
–
To Next Page
Loading...
