Fax (D1180/D1170/D1150)
6-26
Redialing When the Line Is Busy
Redialing Automatically
Automatic redialing enables the machine to
automatically redial the recipient’s fax number if the
recipient cannot be reached due to a busy line, or if
a sending error occurs. Auto Redial can be turned
<ON> or <OFF>. If you set <AUTO REDIAL> to
<ON>, you can set how many times the machine
redials the number, and the redial interval. The
default settings are as follows:
<AUTO REDIAL>: <ON>
<REDIAL TIMES>: <2TIMES>
<REDIAL INTERVAL>: <2MIN.>
<TX ERROR REDIAL>: <ON>
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <TX SETTINGS>,
then press [OK].
3 . T X S E T T I N G S
F A X S E T T I N G S
5
REDIAL>, then press [OK].
3 . A U T O R E D I A L
T X S E T T I N G S
–
–
–
–
6
Press or to select <ON> or
<OFF>, then press [OK].
If you select <OFF>, skip to step 13.
7
Press or to select <REDIAL
TIMES>, then press [OK].
1 . R E D I A L T I M E S
A U T O R E D I A L
8
Use , or
– [numeric keys] to
enter the number of redials (1 to 10
times) the machine will make, then press
[OK].
2 T I M E S
R E D I A L T I M E S
Regardless of the number you entered, the
machine makes only one redialing attempt if it
does not detect a busy signal.
9
Press or to select <REDIAL
INTERVAL>, then press [OK].
2 . R E D I A L I N T E R V A L
A U T O R E D I A L
10
Use , or
– [numeric keys] to
enter the time (2 to 99 minutes, in one-
minute increments) between redials, then
press [OK].
2 M I N .
R E D I A L I N T E R V A L
To Next Page
Loading...
