Canon imageCLASS D1120 - Optional Settings for DRPD Mode

Fax (D1180/D1170/D1150)
6-53
Optional Settings for DRPD Mode
Optional Settings for DRPD Mode
If you select <DRPD> for the receive mode, you can select the ring pattern assigned by your
telephone company. The default setting is <DOUBLE RING>.
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <RX SETTINGS>,
then press [OK].
4 . R X S E T T I N G S
F A X S E T T I N G S
5
Press or to select <DRPD:SELECT
FAX>, then press [OK].
3 . D R P D : S E L E C T F A X
R X S E T T I N G S
6
Press or to select a ring pattern,
then press [OK].
D O U B L E R I N G
D R P D : S E L E C T F A X
You can select from the following ring patterns:
<DOUBLE RING>, <SHORT-SHORT-LONG>,
<SHORT-LONG-SHORT>, <OTHER RING TYPE>,
or <NORMAL RING>
7
Press [Stop/Reset] to return to the
standby mode.