PC3000 with 26" Deck (PC3000-26) User’s Manual
4-2 Document ID 13-003 v 2.0
3. On the ground directly below the V-door edge of the rig floor, measure the distance away from the rig
equivalent to the setback distance (Figure 4-2). Place a marker at that position (for use in step 4).
Figure 4-2: Catwalk Setback Distance
NOTE
Measure setback distance from
the front edge of the roll bar.
Table 4-1: PC3000-26 Standard Configurations
PC3000-26 Standard Configurations
Sub-floor
Height (ft)
Ramp (ft)
Pocket
(in)
Lift Arm
Length (ft)
Lift Arm
Mount (in)
Setback
Distance (in)
18 21 170 14.5 97.32 195
18.5 21 170 14.5 97.32 190
19 21 170 14.5 97.32 185
19.5 25 112 16 97.32 240
20 25 112 16 97.32 239
20.5 25 112 16 97.32 231
21 25 112 18 97.32 227
21.5 25 112 18 97.32 222
22 25 112 18 97.32 217
SUB
-FLOOR HEIGHT
RIG FLOOR
SETBACK DISTANCE
To Next Page
Loading...