Circutor CVM-B100 User Manual

Disconnection delay (OFF):
Maximum value: 999s.
Minimum value: 0s.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen.
● When programming the latch:
Note: If the unit loses its power supply, the latch disappears.
The latch is selected in this parameter, i.e., the transistor digital output will be locked after it
has been tripped, even when the condition that triggered it has disappeared.
Enable the latch.
Disable the latch.
Previous, selects the previous parameter.
Next, selects the next parameter.
Conrm, conrms and saves in the memory the values programmed on the screen.
Back, returns to the home screen of the setup menu Figura 113,
Main Menu, back to the main menu, Figure 25.
Use the keys
and to select the different options.
To conrm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen.
157
Instruction Manual
CVM-B100 - CVM-B150

Circutor CVM-B100 Specifications

General

Brand	Circutor
Model	CVM-B100
Category	Measuring Instruments
Language	English