To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 3560-X and is the answer not in the manual?
General| Enclosure Type | Rack-mountable - 1U |
|---|---|
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 + 4 x SFP |
| Flash Memory | 64 MB |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Operating System | Cisco IOS |
| Device Type | Switch |
| Performance | Switching capacity: 128 Gbps |
| Jumbo Frame Support | Yes |
| Routing Protocol | RIP-1, RIP-2, EIGRP |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS |
| Features | DHCP support, VLAN support, QoS, IPv6 support, Syslog |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at |
| Stacking | Stackable |
| Security Features | SSH, RADIUS, TACACS+ |
| Management | CLI |
| Dimensions (H x W x D) | 17.5 in |
| Operating Temperature | 32 to 113 °F (0 to 45 °C) |
| Humidity | 10 - 95% (non-condensing) |
