Name: Cisco Catalyst 3560-X
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CHAPTER

1-1

Catalyst 3750-X and 3560-X Switch Software Configuration Guide

OL-25303-03

Configuring RMON

This chapter describes how to configure Remote Network Monitoring (RMON) on the Catalyst 3750-X

or 3560-X switch. Unless otherwise noted, the term switch refers to a Catalyst 3750-X or 3560-X

standalone switch and to a Catalyst 3750-X switch stack.

RMON is a standard monitoring specification that defines a set of statistics and functions that can be

exchanged between RMON-compliant console systems and network probes. RMON provides you with

comprehensive network-fault diagnosis, planning, and performance-tuning information.

Note For complete syntax and usage information for the commands used in this chapter, see the “System

Management Commands” section in the Cisco IOS Configuration Fundamentals Command Reference,

Release 12.4.

• Understanding RMON, page 1-1

• Configuring RMON, page 1-2

• Displaying RMON Status, page 1-6

Understanding RMON

RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows

various network agents and console systems to exchange network monitoring data. You can use the

RMON feature with the Simple Network Management Protocol (SNMP) agent in the switch to monitor

all the traffic flowing among switches on all connected LAN segments as shown in Figure 1-1.

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3560-X and is the answer not in the manual?

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)