Cisco Catalyst 3560-X User Manual

1-19
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring MSDP
Monitoring and Maintaining MSDP
Monitoring and Maintaining MSDP
To monitor MSDP SA messages, peers, state, or peer status, use one or more of the privileged EXEC
commands in Table 1-1:
To clear MSDP connections, statistics, or SA cache entries, use the privileged EXEC commands in
Table 1-2:
Table 1-1 Commands for Monitoring and Maintaining MSDP
Command Purpose
debug ip msdp [peer-address | name] [detail] [routes] Debugs an MSDP activity.
debug ip msdp resets Debugs MSDP peer reset reasons.
show ip msdp count [autonomous-system-number] Displays the number of sources and groups originated in SA
messages from each autonomous system. The ip msdp
cache-sa-state command must be configured for this command to
produce any output.
show ip msdp peer [peer-address | name] Displays detailed information about an MSDP peer.
show ip msdp sa-cache [group-address | source-address |
group-name | source-name] [autonomous-system-number]
Displays (S,G) state learned from MSDP peers.
show ip msdp summary Displays MSDP peer status and SA message counts.
Table 1-2 Commands for Clearing MSDP Connections, Statistics, or SA Cache Entries
Command Purpose
clear ip msdp peer peer-address | name Clears the TCP connection to the specified MSDP peer, resetting all
MSDP message counters.
clear ip msdp statistics [peer-address | name] Clears statistics counters for one or all the MSDP peers without resetting
the sessions.
clear ip msdp sa-cache [group-address | name] Clears the SA cache entries for all entries, all sources for a specific group,
or all entries for a specific source/group pair.

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)