Cisco Catalyst 3560-X User Manual

Index
IN-4
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
single session ID 1-35
authoritative time source, described 1-2
authorization
with RADIUS
1-33
with TACACS+ 1-11, 1-16
authorized ports with IEEE 802.1x 1-10
autoconfiguration 1-3
auto enablement 1-33
automatic advise (auto-advise) in switch stacks 1-13
automatic copy (auto-copy) in switch stacks 1-13
automatic discovery
considerations
beyond a noncandidate device
1-8
brand new switches 1-9
connectivity 1-5
different VLANs 1-7
management VLANs 1-7
non-CDP-capable devices 1-6
noncluster-capable devices 1-6
routed ports 1-8
in switch clusters 1-5
See also CDP
automatic extraction (auto-extract) in switch stacks
1-13
automatic QoS
See QoS
automatic recovery, clusters
1-10
See also HSRP
automatic upgrades (auto-upgrade) in switch stacks
1-12
auto-MDIX
configuring
1-35
described 1-34
autonegotiation
duplex mode
1-4
interface configuration guidelines 1-32
mismatches 1-13
autonomous system boundary routers
See ASBRs
autonomous systems, in BGP
1-50
Auto-RP, described 1-7
autosensing, port speed 1-4
autostate exclude 1-6
auxiliary VLAN
See voice VLAN
availability, features
1-9
B
BackboneFast
described
1-7
disabling 1-17
enabling 1-16
support for 1-9
backup interfaces
See Flex Links
backup links
1-2
backup static routing, configuring 1-12
banners
configuring
login
1-12
message-of-the-day login 1-11
default configuration 1-10
when displayed 1-10
Berkeley r-tools replacement 1-54
BGP
aggregate addresses
1-62
aggregate routes, configuring 1-62
CIDR 1-62
clear commands 1-65
community filtering 1-59
configuring neighbors 1-60
default configuration 1-47
described 1-47
enabling 1-50
monitoring 1-65
multipath support 1-54
neighbors, types of 1-50
path selection 1-54
peers, configuring 1-60

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)