Cisco Catalyst 3750-X User Manual

4-10
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 4 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Step 7
discover {controller controller-type | dlci
[subinterface subinterface-number] | interface
[interface-type] | line line-type}
Specify the interface parameters in the CNS connect
profile.
• For controller controller-type, enter the controller
type.
• For dlci, enter the active data-link connection
identifiers (DLCIs).
(Optional) For s
ubinterface subinterface-number,
specify the point-to-point subinterface number that is
used to search for active DLCIs.
• For interface [interface-type], enter the type of
interface.
• For line line-type, enter the line type.
Step 8
template name [ ... name] Specify the list of CNS connect templates in the CNS
connect profile to be applied to the switch configuration.
You can specify more than one template.
Step 9
Repeat Steps 7 to 8 to specify more interface parameters
and CNS connect templates in the CNS connect profile.
Step 10
exit Return to global configuration mode.
Step 11
hostname name Enter the hostname for the switch.
Step 12
ip route network-number (Optional) Establish a static route to the Configuration
Engine whose IP address is network-number.
Command Purpose

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing