B-2
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
• Changing Directories and Displaying the Working Directory, page B-4
• Creating and Removing Directories, page B-5
• Copying Files, page B-5
• Deleting Files, page B-6
• Creating, Displaying, and Extracting Files, page B-6
Displaying Available File Systems
To display the available file systems on your switch, use the show file systems privileged EXEC
command as shown in this example for a standalone switch.
Switch# show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
* 15998976 5135872 flash rw flash:
- - opaque rw bs:
- - opaque rw vb:
524288 520138 nvram rw nvram:
- - network rw tftp:
- - opaque rw null:
- - opaque rw system:
- - opaque ro xmodem:
- - opaque ro ymodem:
This example shows a switch stack. In this example, the stack master is stack member 2; therefore
flash2: is aliased to flash:. The file system on stack member 5 is displayed as flash5 on the stack
master.
Switch# show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque ro bs:
* 57409536 25664000 flash rw flash: flash2:
- - opaque rw system:
524288 512375 nvram rw nvram:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - opaque rw null:
- - opaque ro tar:
- - network rw tftp:
- - network rw rcp:
- - network rw http:
- - network rw ftp:
- - opaque ro cns:
57409536 27306496 flash rw flash5:
Ta ble B-1 show file systems Field Descriptions
Field Value
Size(b) Amount of memory in the file system in bytes.
Free(b) Amount of free memory in the file system in bytes.
To Next Page
Loading...
Need help?
General
