Cisco Catalyst 3750-X User Manual

C-11
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Appendix C Unsupported Commands in Cisco IOS Release 12.2(53)SE2
Miscellaneous
Miscellaneous
Unsupported User EXEC Commands
verify
Unsupported Privileged EXEC Commands
file verify auto
remote command
show cable-diagnostics prbs
test cable-diagnostics prbs
Unsupported Global Configuration Commands
errdisable recovery cause unicast flood
l2protocol-tunnel global drop-threshold
memory reserve critical
service compress-config
stack-mac persistent timer (supported on Cat
alyst 3750-X switches only)
track ob
ject-number rtr
MSDP
Unsupported Privileged EXEC Commands
show access-expression
show exception
show location
show pm LINE
show smf [int
erface-id]
show subscriber-policy [p
olicy-number]
show template [t
emplate-name]
Unsupported Global Configuration Commands
ip msdp default-peer ip-address | name [prefix-list list] (Because BGP/MBGP is not supported, use the
ip msdp peer command instead of this command.)

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing