Cisco Catalyst 3750-X User Manual

1-9
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 1 Overview
Features
• Flex Link Layer 2 interfaces to back up one another as an alternative to STP for basic link
redundancy
• Link-state tracking to mirror the state of the ports that carry upstream traffic from connected hosts
and servers and to allow the failover of the server traffic to an operational link on another Cisco
Ethernet switch
• StackPower redundancy option. You can configure power supplies in a stack in redundant mode so
that an unused power supply will turn on if a power supply in the stack fails.
VLAN Features
• Support for up to 1005 VLANs for assigning users to VLANs associated with appropriate network
resources, traffic patterns, and bandwidth
• Support for VLAN IDs in the 1 to 4094 range as allowed by the IEEE 802.1Q standard
• VLAN Query Protocol (VQP) for dynamic VLAN membership
• Inter-Switch Link (ISL) and IEEE 802.1Q trunking encapsulation on all ports for network moves,
adds, and changes; management and control of broadcast and multicast traffic; and network security
by establishing VLAN groups for high-security users and network resources
• Dynamic Trunking Protocol (DTP) for negotiating trunking on a link between two devices and for
negotiating the type of trunking encapsulation (IEEE 802.1Q or ISL) to be used
• VLAN Trunking Protocol (VTP) and VTP pruning for reducing network traffic by restricting
flooded traffic to links destined for stations receiving the traffic
• Voice VLAN for creating subnets for voice traffic from Cisco IP Phones
• Dynamic voice virtual LAN (VLAN) for multidomain authentication (MDA) to allow a dynamic
voice VLAN on an MDA-enabled port
• VLAN 1 minimization for reducing the risk of spanning-tree loops or storms by allowing VLAN 1
to be disabled on any individual VLAN trunk link. With this feature enabled, no user traffic is sent
or received on the trunk. The switch CPU continues to send and receive control protocol frames.
• Private VLANs to address VLAN scalability problems, to provide a more controlled IP address
allocation, and to allow Layer 2 ports to be isolated from other ports on the switch
• Port security on a PVLAN host to limit the number of MAC addresses learned on a port, or define
which MAC addresses may be learned on a port
• VLAN Flex Link Load Balancing to provide Layer 2 redundancy without requiring Spanning Tree
Protocol (STP). A pair of interfaces configured as primary and backup links can load balance traffic
based on VLAN.
• Support for VTP version 3 that includes support for configuring extended range VLANs (VLANs
1006 to 4094) in any VTP mode, enhanced authentication (hidden or secret passwords), propagation
of other databases in addition to VTP, VTP primary and secondary servers, and the option to turn
VTP on or off by port
Security Features
• Web authentication to allow a supplicant (client) that does not support IEEE 802.1x functionality to
be authenticated using a web browser.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing