Cisco Catalyst 3750-X User Manual

36-8
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 36 Configuring Embedded Event Manager
Displaying Embedded Event Manager Information
4 _config_cmd1 interface Ethernet1/0
5 _config_cmd2 no shut
This example shows a CRON timer environment variable, which is assigned by the software, to be set to
every second minute, every hour of every day:
Switch(config)# event manager environment_cron_entry 0-59/2 0-23/1 * * 0-6
This example shows the sample EEM policy named tm_cli_cmd.tcl registered as a system policy. The
system policies are part of the Cisco IOS image. User-defined TCL scripts must first be copied to flash
memory.
Switch(config)# event manager policy tm_cli_cmd.tcl type system
Displaying Embedded Event Manager Information
To display information about EEM, including EEM registered policies and EEM history data, see the
Cisco IOS Network Management Command Reference.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing