Cisco Catalyst 3750-X User Manual

14-20
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 14 Configuring Auto Smartports Macros
Displaying Auto Smartports and Static Smartports Macros
Switch(config)# interface gigabitethernet1/0/4
Switch(config)# interface gigabit
ethernet0/4
Switch(config-if)# macro apply ci
sco-desktop $AVID 25
Displaying Auto Smartports and Static Smartports Macros
To display the Auto Smartports and static Smartports macros, use one or more of the privileged EXEC
commands in Table 14-5.
Ta ble 14-5 Commands for Displaying Auto Smartports and Static Smartports Macros
Command Purpose
show macro auto Displays information about Auto Smartports macros.
show parser macro Displays all static Smartports macros.
show parser macro name ma
cro-name Displays a specific static Smartports macro.
show parser macro brief Displays the static Smartports macro names.
show parser macro description [in
terface
interface-id]
Displays the static Smartports macro description for all interfaces or
for a specified interface.
show shell Displays information about Auto Smartports event triggers and
macro
s.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing