Cisco Catalyst 3750-X User Manual

B-7
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
Beginning in privileged EXEC mode, follow these steps to create a file, display the contents, and extract
it.
Command Purpose
Step 1
archive /create destination-url
flash:/file-url
Create a file and add files to it.
For destin
ation-url, specify the destination URL alias for the local or network
file system and the name of the file to create. The -filename. is the file to be
created. These options are supported:
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//use
rname[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//use
rname@location]/directory]/-filename.
• TFTP syntax:
tftp:[[//locat
ion]/directory]/-filename.
For flash:/fi
le-url, specify the location on the local flash file system in which
the new file is created. You can also specify an optional list of files or directories
within the source directory to add to the new file. If none are specified, all files
and directories at this level are written to the newly created file.
Step 2
archive /table source-url Display the contents of a file.
For sour
ce-url, specify the source URL alias for the local or network file
system. The -filename. is the file to display. These options are supported:
• Local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//use
rname[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//use
rname@location]/directory]/-filename.
• TFTP syntax:
tftp:[[//locat
ion]/directory]/-filename.
You can also limit the file displays by specifying a list of files or directories after
the f
ile. Only those files appear. If none are specified, all files and directories
appear.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing