Cisco Catalyst 3750-X - Page 1387

Index
IN-11
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
default configuration (continued)
MVR 26-19
NTP 7-4
optional spanning-tree configuration 22-12
OSPF 42-27
password and privilege level 10-2
PIM 48-11
private VLANs 18-6
RADIUS 10-27
RIP 42-21
RMON 33-3
RSPAN 32-12
SDM template 8-4
SNMP 35-6
SPAN 32-12
SSL 10-51
standard QoS 39-34
STP 20-12
switch stacks 5-20
system message logging 34-4
system name and prompt 7-15
TACACS+ 10-13
UDLD 31-4
VLAN, Layer 2 Ethernet interfaces 15-17
VLANs 15-7
VMPS 15-27
voice VLAN 17-3
VTP 16-8
WCCP 47-5
default gateway 3-15, 42-12
default networks 42-93
default router preference
See DRP
default routes
42-93
default routing 42-3
default web-based authentication configuration
802.1X
12-9
deleting VLANs 15-8
denial-of-service attack 28-1
description command 13-36
designing your network, examples 1-19
desktop template 5-10
destination addresses
in IPv4 ACLs
37-12
in IPv6 ACLs 38-5
destination-IP address-based forwarding,
EtherChannel
40-9
destination-MAC address forwarding, EtherChannel 40-9
detecting indirect link failures, STP 22-8
device discovery protocol 29-1, 30-1
device manager
benefits
1-2
described 1-2, 1-5
in-band management 1-7
requirements l
DHCP
Cisco IOS server database
configuring
24-14
default configuration 24-9
described 24-6
DHCP for IPv6
See DHCPv6
enabling
relay agent
24-11
server 24-10
DHCP-based autoconfiguration
client request message exchange
3-4
configuring
client side
3-4
DNS 3-8
relay device 3-8
server side 3-7
server-side 24-10
TFTP server 3-7
example 3-10
lease options
for IP address information
3-7
for receiving the configuration file 3-7