Index
IN-26
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
IPv6 (continued)
address formats 43-2
and switch stacks 43-9
applications 43-5
assigning address 43-11
autoconfiguration 43-5
CEFv6 43-19
default configuration 43-11
default router preference (DRP) 43-4
defined 43-1
Enhanced Interior Gateway Routing Protocol (EIGRP)
IPv6
43-7
EIGRP IPv6 Commands 43-7
Router ID 43-7
feature limitations 43-9
features not supported 43-8
forwarding 43-11
ICMP 43-4
monitoring 43-27
neighbor discovery 43-4
OSPF 43-7
path MTU discovery 43-4
SDM templates 8-2, 27-1, 38-1
stack master functions 43-10
Stateless Autoconfiguration 43-5
supported features 43-3
switch limitations 43-9
understanding static routes 43-6
IPv6 traffic, filtering 38-4
IRDP
configuring
42-13
definition 42-13
support for 1-14
IS-IS
addresses
42-65
area routing 42-65
default configuration 42-66
monitoring 42-74
show commands 42-74
system routing 42-65
ISL
and IPv6
43-3
and trunk ports 13-3
encapsulation 1-9, 15-14
trunking with IEEE 802.1 tunneling 19-5
ISO CLNS
clear commands
42-74
dynamic routing protocols 42-64
monitoring 42-74
NETs 42-64
NSAPs 42-64
OSI standard 42-64
ISO IGRP
area routing
42-65
system routing 42-65
isolated port 18-2
isolated VLANs 18-2, 18-3
J
join messages, IGMP 26-3
K
KDC
described
10-39
See also Kerberos
keepalive messages
20-2
To Next Page
Loading...
