Cisco Catalyst 3750-X - Page 1407

Index
IN-31
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
MSDP
benefits of 49-3
clearing MSDP connections and statistics 49-19
controlling source information
forwarded by switch
49-12
originated by switch 49-8
received by switch 49-14
default configuration 49-4
dense-mode regions
sending SA messages to
49-17
specifying the originating address 49-18
filtering
incoming SA messages
49-14
SA messages to a peer 49-12
SA requests from a peer 49-11
join latency, defined 49-6
meshed groups
configuring
49-16
defined 49-16
originating address, changing 49-18
overview 49-1
peer-RPF flooding 49-2
peers
configuring a default
49-4
monitoring 49-19
peering relationship, overview 49-1
requesting source information from 49-8
shutting down 49-16
source-active messages
caching
49-6
clearing cache entries 49-19
defined 49-2
filtering from a peer 49-11
filtering incoming 49-14
filtering to a peer 49-12
limiting data with TTL 49-14
monitoring 49-19
restricting advertised sources 49-9
support for 1-14
MSTP
boundary ports
configuration guidelines
21-16
described 21-6
BPDU filtering
described
22-3
enabling 22-14
BPDU guard
described
22-2
enabling 22-13
CIST, described 21-3
CIST regional root 21-3
CIST root 21-5
configuration guidelines 21-15, 22-12
configuring
forward-delay time
21-24
hello time 21-23
link type for rapid convergence 21-25
maximum aging time 21-24
maximum hop count 21-25
MST region 21-16
neighbor type 21-26
path cost 21-21
port priority 21-20
root switch 21-18
secondary root switch 21-19
switch priority 21-22
CST
defined
21-3
operations between regions 21-3
default configuration 21-14
default optional feature configuration 22-12
displaying status 21-27
enabling the mode 21-16
EtherChannel guard
described
22-10
enabling 22-17