Cisco Catalyst 3750-X - Page 1411

Index
IN-35
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
online diagnostics
described 52-1
overview 52-1
running tests 52-4
open1x
configuring
11-64
open1x authentication
overview
11-27
Open Shortest Path First
See OSPF
optimizing system resources
8-1
options, management 1-5
OSPF
area parameters, configuring
42-31
configuring 42-29
default configuration
metrics
42-32
route 42-32
settings 42-27
described 42-25
for IPv6 43-7
interface parameters, configuring 42-30
LSA group pacing 42-34
monitoring 42-35
router IDs 42-34
route summarization 42-32
support for 1-14
virtual links 42-32
out-of-profile markdown 1-13
P
packet modification, with QoS 39-22
PAgP
Layer 2 protocol tunneling
19-9
See EtherChannel
parallel paths, in routing tables
42-91
passive interfaces
configuring
42-101
OSPF 42-33
passwords
default configuration
10-2
disabling recovery of 10-5
encrypting 10-3
for security 1-10
in clusters 6-14
overview 10-1
recovery of 51-3
setting
enable
10-3
enable secret 10-3
Telnet 10-6
with usernames 10-6
VTP domain 16-9
path cost
MSTP
21-21
STP 20-20
path MTU discovery 43-4
payload encryption 1-1
PBR
defined
42-97
enabling 42-99
fast-switched policy-based routing 42-100
local policy-based routing 42-100
PC (passive command switch) 6-10
peers, BGP 42-58
percentage thresholds in tracked lists 46-6
performance, network design 1-19
performance features 1-4
persistent self-signed certificate 10-50
per-user ACLs and Filter-Ids 11-9
per-VLAN spanning-tree plus
See PVST+
PE to CE routing, configuring
42-84
physical ports 13-2